A 510 Advanced Two-Component Epoxy Adhesive

Description

A510 is a high-performance, two-component adhesive system based on premium epoxy resins, offering exceptional bonding strength. This product is engineered to create permanent bonds between stone, ceramics, and iron. It is particularly suitable for installing acid-resistant tiles in environments requiring superior chemical and mechanical resistance. Additionally, it serves as an excellent grout for acid-resistant tile joints. For optimal performance, it is recommended to store and apply the product at temperatures between 25°C and 35°C.
​
Application Guidelines:
​To prepare the mixture, blend 3 parts of Resin A with 1 part of Hardener B until a perfectly homogeneous consistency is achieved. Apply an adequate amount of the mixture to the target surface and bond the materials (stone, ceramic, or iron) immediately.
​For grouting acid-resistant joints, apply the prepared paste into the gaps and ensure any excess material is cleaned from the tile edges within 30 minutes. Note that the adhesive will begin to gel within 40 minutes, after which it will harden and lose its workability.
​
Pre-Installation & Limitations:
​The substrate must be thoroughly cleaned and free of any dust, debris, or grease before application. The ambient surface temperature must be at least 15°C during the process.
​Restrictions: This adhesive is not recommended for use on sandstone, limestone, or other structurally weak stones. Due to their layered nature, these materials may delaminate or separate under minimal mechanical pressure.