Description

This product is formulated based on emulsion copolymers, featuring a milky color and excellent waterproofing properties. It can be utilized effectively as a moisture barrier. Developed using advanced nanotechnology, the impermeability of this resin after application ensures full waterproofing and high resistance to corrosive chemicals.
Pre-Application Steps
⦁ Surface Preparation: Before application, the surface must be completely dry, clean, and free of dust, grease, and any contamination to guarantee full adhesion and insulation performance.
⦁ Repairs: Initial repair is recommended if deep cracks are present on the substrate.
How to Use
⦁ Direct Application: This insulation can be applied directly onto concrete, brick, stone, and other surfaces. It can also be mixed with various powder adhesives produced by this company.
⦁ Mixing Ratio: The ratio is adjusted based on the application type and required resistance (typically replacing 20% to 40% of the mortar or adhesive’s mixing water).
⦁ Mixing Process: Pour the base powder into a suitable container, then slowly add WAC400. Mix with an electric or manual stirrer until a uniform, lump-free paste is obtained.
⦁ Application: Apply the prepared mortar onto the surface using a spatula, trowel, or brush.
⦁ Layering: For guaranteed coverage and better performance, applying two layers is recommended. Ensure each layer is completely dry before applying the next.
⦁ Drying Time: Drying depends on environmental conditions (typically 24 to 48 hours). Avoid direct contact with water or rain during this period.