.png)
Porcelain, Ceramic & Stone Tile Adhesives
A 410 HighPerformance Slab adhesive
A 410 High-Performance Slab Adhesive (Powder-Based)
A 410 High-Performance Slab Adhesive (Powder-Based) Single-Component System
Product Characteristics
A 410 is a specialized single-component adhesive formulated from high-grade mineral powders, organic additives, and advanced polymers. Specifically reinforced with synthetic fibers, this product is designed for high-durability bonding on both floors and walls, suitable for interior and exterior environments. Its versatile formulation allows for reliable application on gypsum-based substrates and surfaces equipped with underfloor heating systems. It is an ideal choice for high-traffic areas, bathrooms, balconies, patios, and swimming pools.
How to use:
Combine one 20 kg bag of A410 with approximately 4.5 to 5 liters of clean water. It is mandatory to use a mechanical mixer to ensure a smooth, lump-free paste. If the mixture remains too stiff, gradually add a small amount of additional water and remix until the desired consistency is achieved.
Allow the adhesive to rest for 5 to 10 minutes to activate its chemical properties, then remix for one final minute. Using a notched trowel, apply the adhesive using the “double-spread” technique (to both the substrate and the back of the slab), ensuring all ridges are pulled in the same direction. Once the slab is in place, use a vibration tool to expel any air trapped underneath. Grouting should be deferred for at least 72 hours. During this curing phase, protect the installation from any pressure or vibrations that could lead to slab displacement
Substrate Preparation
The installation area must be completely sanitized from dust, debris, and oily residues. For “tile-on-tile” or “tile-on-stone” applications, mechanically abrade (scratch) at least two-thirds of the existing surface. For gypsum-based surfaces, the area must be scratched and treated with a high-quality primer before applying the adhesive.
More Informations
Applications:
- Designed for the installation of ceramic slabs.
- Capable of being installed on all surfaces, including concrete, stone, blocks, ceramics, and gypsum.
- Suitable for both wall and floor applications in interior and exterior environments.
Important Note:
This product is prepared based on the requirements of the European standard INSO 12492-1. Due to the powerful polymer additives in its composition, it has been classified as Class: C2TES1. This product can function as a powerful adhesive for installing large porcelain slabs as a single-component system, without the need for other additives.
Technical Specifications
Specification | Value |
Physical State | Homogeneous powder |
Color Variety – Specific Gravity | White – 1.4 g/cm3 |
Chloride | ….. |
Mixing Ratio with Water or Supplement | Approximately 23% to 26% of powder weight |
Installation Temperature | +10 to +40 °C |
Temperature Resistance (Fully Cured) | -25 to +80 °C |
Tensile Strength | 1.2 N/mm2 |
Shear Strength | 1.2 N/mm2 |
Adhesive Tensile Strength (After water immersion) | 1.2 N/mm2 |
Adhesive Tensile Strength (After heat exposure) | 1.2 N/mm2 |
Chemical Resistance | …… |
Pot Life / Open Time | 30 Minutes |
Initial Drying Time | 48 to 72 Hours after installation |
Grouting Time | 72 Hours after installation |
Mortar Thickness – Consumption Rate | 4 to 6 mm – 6 to 8kg/m2 |
Shelf Life and Storage Conditions | Maximum one year after production; keep away from moisture and direct sunlight. |
A430
A450 Porcelain Tile Adhesive
A430 – A450 Porcelain Tile Adhesive
Product Description:
To install ceramics on exterior walls or at high altitudes, the use of a scope (tile clip) is mandatory. There are various methods for using these clips; in some techniques, the scope must be bonded to the back of the ceramic. For the secure bonding of metal clips to the back of ceramics or stones, a specialized adhesive is required.
BOB’s A530 scope adhesive has been specifically designed and produced for this purpose. This product is based on two-component epoxy resins and is solvent-free. Once applied, the scope is firmly bonded to the back of the tile and cannot be separated or detached under normal pressure.
How to use:
- 1. First, clean the application surface of any contamination, grease, dust, dirt, cement residues, etc. Smooth or polished surfaces should be roughened or scratched before application.
- 2. Thoroughly mix the two components according to the ratio stated on the packaging until a completely homogeneous and uniform mixture is obtained.
- 3. To bond the scope (tile clip), pour approximately 10 grams of the mixed A530 adhesive on the desired spot, place the scope on it, and cover the edges of the scope with the adhesive.
- 4. The scope adhesive begins to set after 30 minutes and reaches its initial hardening stage after 2 hours.
- 5. It is recommended to wait 24 hours after installation before subjecting the scopes to any load or use on the surface.
Substrate Preparation
A500
based on advanced polymer materials
A500- based on advanced polymer materials
Product Introduction:
This product is based on advanced polymer materials and is specifically designed for environments exposed to acid washing and corrosive chemicals, such as laboratories, food industry factories, and petrochemical plants. It offers the highest level of resistance against mechanical stressors, acids, and bases.
How to Use:
The contents of each 4 kg bag should be mixed with one 1-liter bottle of L500 resin using an electric mixer. If necessary, a small amount of water may be used as a secondary additive. Once the mixture reaches a dough-like consistency, let it rest for 5 minutes, then mix briefly again before application.
Substrate Preparation
The contents of each 4 kg bag should be mixed with one 1-liter bottle of L500 resin using an electric mixer. If necessary, a small amount of water may be used as a secondary additive. Once the mixture reaches a dough-like consistency, let it rest for 5 minutes, then mix briefly again before application.
A400
Premium Slab Adhesive
(Powder-Based)
A 400-Premium Slab Adhesive (Powder-Based)
Product Introduction:
A 400 is a high-performance, two-component adhesive system comprising hydraulic binders, mineral aggregates, and advanced organic/polymeric additives, further reinforced with cellulose fibers. Specifically engineered for large-format porcelain slabs and natural stones, this product is ideal for both interior and exterior applications (building facades) on floors and walls. The integration of fiber reinforcement ensures superior structural integrity and bonding strength.
How to Use:
To prepare, blend one 20 kg bag of A400 adhesive with 4 liters of L 300 supplementary liquid. A mechanical mixer must be used to achieve a smooth, homogeneous paste. If the consistency is too thick, small amounts of water may be added gradually until the desired texture is reached.
Allow the mixture to mature for 5 minutes, then remix for an additional minute. Using the “double-back” bonding technique with a notched trowel, apply the adhesive to both the substrate and the back of the slab, ensuring all ridges are combed in the same direction. Once the slab is positioned, utilize a vibration machine to eliminate any trapped air pockets. Grouting should only be performed at least 72 hours post-installation. Avoid any mechanical stress, pressure, or vibrations during this curing
period to prevent slab displacement.
Substrate Preparation
The target surface must be thoroughly cleaned of dust, debris, and grease. For installations over existing tiles, paint, or old gypsum, it is mandatory to mechanically abrade (scratch) at least two-thirds of the surface area. For substrates such as gypsum, lightweight blocks, or similar porous materials, a suitable primer coat must be applied before the adhesive. Note: This product is designed to be used exclusively in combination with the L300 supplementary liquid.
A530
Scope(Tile Clip) Adhesive
A530: Scope (Tile Clip) Adhesive
Product Introduction:
To install ceramics on exterior walls or at high altitudes, the use of a scope (tile clip) is mandatory. There are various methods for using these clips; in some techniques, the scope must be bonded to the back of the ceramic. For the secure bonding of metal clips to the back of ceramics or stones, a specialized adhesive is required.
BOB’s A530 scope adhesive has been specifically designed and produced for this purpose. This product is based on two-component epoxy resins and is solvent-free. Once applied, the scope is firmly bonded to the back of the tile and cannot be separated or detached under normal pressure.
How to Use:
First, mix approximately 4 liters of WAC200 liquid with 4 kg of its special powder to create a slurry. Apply this mixture thoroughly to the surface using a brush or roller.
After it dries, lay a fiberglass mesh over the surface. Mix the remaining 12 kg of powder with 4 liters of WAC200 liquid to form a paste. Apply a 2 mm thick layer of this paste onto the surface using a spatula or trowel. Once dry, if any hairline cracks are observed, prepare the slurry again (as in the first step) and apply it to the surface with a brush or roller. After completion, you can proceed with installing tiles or ceramics.
Substrate Preparation
The contents of each 4 kg bag should be mixed with one 1-liter bottle of L500 resin using an electric mixer. If necessary, a small amount of water may be used as a secondary additive. Once the mixture reaches a dough-like consistency, let it rest for 5 minutes, then mix briefly again before application.
L500
Scope (Tile Clip) Adhesive
L400-L 500
Product Introduction:
This product is formulated based on copolymer resins. it enhances the adhesion of tile adhesives and improves the mechanical and chemical properties of both tile adhesives and grout powders.
By adding L 500 supplement liquid to grout powder, its anti-acid properties are increased, making it resistant to many chemicals.
How to Use:
- Adding L 400 liquid to tile adhesive not only increases adhesion but also makes the adhesive waterproof. The combination of water, A430 tile adhesive, and L400 can be used as a “Pool Tile Adhesive” for wet areas.
- Adding L 400 to A430 tile adhesive increases adhesion, mechanical and chemical resistance, and shear stress tolerance.
Substrate Preparation
Slab
Supplement (L300)
Slab Supplement (L 300)
Product Introduction:
This product is an emulsion polymer designed to enhance the adhesion of A400 tile adhesive. It significantly increases the mechanical, tensile, and flexural strength of the adhesive. By adding this supplement to the A400 adhesive, it becomes suitable for installing stones, large slabs, porcelain, and oversized ceramics.
How to Use:
Substrate Preparation
