N 500: Nano Glass Insulation

Description

This is a high-performance, solvent-based thermoplastic resin designed as a protective and decorative coating for various surfaces, including stone, ceramics, porcelain, concrete, and wood. Due to its superior resistance and high adhesion properties, it is an ideal choice for painting swimming pools, building facades, and waterproofing surfaces. Once applied, it forms a uniform, high-adhesion layer with a brilliant glossy finish. It also demonstrates excellent resistance against discoloration (yellowing), dirt absorption, and moisture penetration.
​
Application Method:
​The transparent insulation can be applied using a brush, roller, or spray.
​To ensure a uniform coating, it is recommended to apply the insulation in several thin layers.
​Allow each layer to dry completely before applying the next.
​The layers typically require 4 to 6 hours to dry fully; however, this duration may vary depending on environmental conditions.
​For thicker coats or in high-humidity environments, the drying time may increase.
​If necessary, additional layers can be applied after the first layer has dried to provide enhanced protection.
​Once fully cured, the surface should be inspected for uniformity and the absence of cracks or bubbles. Any defects can be easily repaired with a fresh coat.

​Pre-Installation Steps:
​First, the target surface must be thoroughly cleaned of all dust, particles, and grease.
​Cracks and joints must be filled with appropriate materials (such as adhesives or repair mortars) and allowed to dry completely to ensure a smooth, even surface for the insulation.